孙东明，中国科学院金属研究所研究员。孙东明，男，汉族，1978年12月出生，中共党员，现任中国科学院金属研究所研究员，博士生导师，创新课题组组长。[1]2012年入选中国科学院“百人计划”,2013年入选国家级青年人才项目，2014年获得国家优秀青年科学基金项目资助。

简历

1997年09月-2001年06月:本科,电子材料与元器件专业,电子工程系,吉林大学.

2001年09月-2006年06月:博士,微电子学与固体电子学专业,集成光电子学国家（联合）重点实验室,电子科学与工程学院,吉林大学.

2006年09月-2008年04月:博士后研究员,Frontier创造共同研究中心,日本东京工业大学.

2008年04月-2009年03月:博士后研究员,精密工学研究所,日本东京工业大学.

2009年04月-2012年05月:博士后研究员,量子工学研究科,日本名古屋大学.

2012年06月-研究员,先进炭材料研究部,沈阳材料科学国家(联合)实验室,中国科学院金属研究所.

研究领域

1、碳纳米材料（碳纳米管/石墨烯）电子学器件

2、微机械电子系统(MEMS)和压电超声波马达

社会任职

担任以色列国家科学基金委项目评议专家和10余种学术期刊的审稿人，如IEEE Trans. Ultrason. Ferroelectr. Freq. Control、Nanotechnology、IEEE Trans. Ind. Electron.、Smart Mat. Struct.、Carbon等。

科研项目

透明柔软的薄膜晶体管电路在未来电子纸、柔性电池、电子标签、柔性显示和透明显示等领域具有广阔的应用前景，器件性能的突破源于新型有机或无机材料的发现和选用。不同于传统的硅基电路，柔性电子器件需要采用新材料和新技术制作于柔性的塑料等衬底上。氧化物半导体具有较高载流子迁移率，但机械柔韧性较差。有机半导体的室温工艺条件和低成本优势是未来柔性电子发展方向之一，但其载流子迁移率较低、环境稳定性差等问题仍亟待改善。新型碳纳米材料（如碳纳米管、石墨烯）具有优异的电学、光学和机械特性，适合于制备透明柔性的薄膜晶体管电路，将极有可能促进柔性电子器件的发展。

获奖荣誉

2011年在NT11 International Conference on the Science and Application of Nanotubes会议上，获得“Best Poster Prize Winner”奖。

2009年获得Sensors and Actuators, A: Physical杂志颁发的“Valued Reviewer”奖。

2005年获得了国家留学基金委颁发的“惠普中国优秀学生奖”。

会议报告

1. Dong-ming Sun, Marina Y. Timmermans, Antti Kaskela, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “All-carbon thin film transistors and integrated circuits for flexible and transparent electronics”

2. Dong-ming Sun, Marina Y. Timmermans, Ying Tian, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “High-performance Carbon Nanotube Thin-film Transistors with >600 cm2V–1s–1 Mobility and >107 On/off Ratio”, 2011 International Conference on Solid State Devices and Materials (SSDM 2011), September Nagoya, Japan.

3. Dong-ming Sun, Marina Y. Timmermans, Ying Tian, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “Characterization of carbon nanotube thin-film transistors: mobility and on/off ratio”, The 72nd Japanese Society of Applied Physics (JSAP) Autumn Meeting, August 29- September Yamagata, Japan.

4. Dong-ming Sun, Marina Y. Timmermans, Ying Tian, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “High-performance, Functional Carbon Nanotube Integrated Circuits On Plastic”, The 12th International Conference on the Science and Application of NanotubesCambridge, United Kingdom.

5. Dong-ming Sun, Marina Y. Timmermans, Ying Tian, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “High-performance, Functional Carbon Nanotube Integrated Circuits On Plastic”, 2011 Asia-Pacific Workshop on Fundamentals and Applications of Advanced Semiconductor DevicesDaejeon, Korea.

6. Dong-ming Sun, Marina Y. Timmermans, Ying Tian, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “Flexible, high-performance carbon nanotube integrated circuits”, The Fifth Rice University, Air Force Research Laboratory, and NASA Workshop on Nucleation and Growth Mechanisms of Single Wall Carbon Nanotubes, April Texas, USA.

7. Dong-ming Sun, Marina Y. Timmermans, Ying Tian, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “Performance characterization of carbon nanotube thin-film transistors fabricated by gas-phase filtration and transfer process”, The 58th Japanese Society of Applied Physics (JSAP) Spring Meeting, March Kanagawa, Japan.

8. Dong-ming Sun, Marina Y. Timmermans, Ying Tian, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “Carrier mobility and on/off ratio of carbon nanotube thin-film transistors fabricated by gas-phase filtration and transfer process”, The 40th Fullerenes-Nanotubes General Symposium, March Nagoya, Japan.

9. Dong-ming Sun, Marina Zavodchikova, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “High-performance carbon nanotube thin-film transistors based on a simple transfer method”, The 71st Japanese Society of Applied Physics (JSAP) Autumn Meeting, September Nagasaki, Japan.

10. Dong-Ming Sun, Marina Zavodchikova, Albert G. Nasibulin, Shigeru Kishimoto, Takashi Mizutani, Esko I. Kauppinen and Yutaka Ohno, “High-performance thin-film transistors with as-synthesized carbon nanotubes based on simple transfer technique”, The 39th Fullerenes-Nanotubes General Symposium, September Kyoto, Japan.

11. Dongming Sun, Sheng Wang, Seiichi Hata, Junpei Sakurai and Akira Shimokohbe, “Design and fabrication on a novel traveling wave type cylindrical ultrasonic linear microactuator”, 2009 JSME-IIP/ASME-ISPS Joint Conference on Micromechatronics for Information and Precision Equipment, Tsukuba, Japan.

12. Dongming Sun, Sheng Wang, Seiichi Hata, Junpei Sakurai and Akira Shimokohbe, “Driving mechanism and experimental realization of a cylindrical ultrasonic linear microactuator”, 34th International Conference on Micro & Nano Engineering, Septembe Athens, Greece.

13. Dongming Sun, Sheng Wang, Seiichi Hata, Junpei Sakurai and Akira Shimokohbe, “Development of the cylindrical ultrasonic linear microactuator”, The 25th Sensor Symposium, IEEJ SMS Symposium on Sensors, Micromachines & Applied Systems,Okinawa, Japan.

14. Dongming Sun, Sheng Wang, Seiichi Hata and Akira Shimokohbe, “Cylindrical ultrasonic linear microactuator with 10mm length stator”, The Japan Society for Precision Engineering (JSPE) Spring Meeting, MarchTokyo, Japan.

15. Dongming Sun, Sheng Wang and Seiichi Hata, “Vibration analysis of a cylindrical ultrasonic linear microactuator using COMSOL Multiphysics”, 2007 Tokyo COMSOL conference, December

16. Dongming Sun, Sheng Wang, Seiichi Hata and Akira Shimokohbe, “Research on the driving mechanism for a new type of ultrasonic linear microactuator”, The Japan Society for Precision Engineering (JSPE) Autumn Meeting, September

代表论著

1. Dong-ming Sun, Marina Y. Timmermans, Ying Tian, Albert G. Nasibulin, Esko I. Kauppinen, Shigeru Kishimoto, Takashi Mizutani and Yutaka Ohno, 2011, “Flexible high-performance carbon nanotube integrated circuits”, Nature Nanotechnology

2. Dongming Sun, Sheng Wang, Seiichi Hata, Junpei Sakurai and Akira Shimokohbe, 2010, “Theoretical and experimental investigation of traveling wave propagation on a several-millimeter-long cylindrical pipe driven by piezoelectric ceramic tubes”, IEEE Transactions on Ultrasonics, Ferroelectrics, and Frequency Control

3. Dongming Sun, Sheng Wang, Junpei Sakurai, Kee-Bong Choi, Seiichi Hata and Akira Shimokohbe, 2010, “A piezoelectric linear ultrasonic motor with the structure of circular cylindrical stator and slider”, Smart Materials and Structures

获得专利

1. Actuator

2. Actuator

3. Field-effect transistor with carbon nanotube

人物访谈

全国人大代表、中国科学院金属研究所研究员孙东明2006年吉林大学博士毕业后，留学日本东京工业大学和名古屋大学，从事微纳电子器件领域的博士后研究。2012年，孙东明回国，加入中国科学院金属研究所，主攻纳米碳材料电子器件研究。

2018年，作为青年科技工作者代表，40岁的孙东明当选第十三届全国人大代表。

疫情期间，身兼中科院金属所工会主席的孙东明冲到了防控前线。一度紧缺的口罩激发了孙东明的科研灵感，他对学生说：“我们是研究纳米碳材料的，新材料能不能应用在防护产品、病毒检测上，就看我们了。”

3个月时间，团队已经有了一定科研成果。孙东明说，疫情给我的最大启示就是带着问题去进行研究，从国家和群众需求的角度搞科研。