MasterCode（MasterCode）-趣爱秀

软件说明

本软件运行在s60 平台上，计算出的锁码适用于Nokia DCT3 (6110,8210,etc..) 以及DCT4 (8310,etc...)等等机型...（具体机型详见下面的列表）

每次计算出来的锁码直到IMEI 码改变之前都是有效的！

注意：

MasterCode

此软件只对手机锁码有效，而非SP 所给密码！

本软件在6630 /N-Gage安装测试通过，计算出来的号码可以用在 6110,8210,8310上（注：也就是说，可以在自己的手机上通过别人的IMEI 码计算出他的锁码~）！

如果你在使用此软件的过程中有任何问题，请停止使用！

支持安装此软件的机型： S60V1 S60V2 如3650/ QD /6600 /7610 /3230 / 6630 、6670、6680、6681等等

支持解锁机器型号列表：

DCT-3 Phones :

3610, 2100, 3410, 6250, 3310, 3330, 3350, 3390, 6210, 5510, 5190, 6190, 8890, 8290, 5110, 5110i, 6110, 7110, 8810, 3210, 5130, 6130, 6150, 8850, 8210, 8250, 8855, 5210, 9110, 6090, CardPhone, CardPhone 2, Nokia 22

DCT-4 Phones :

D211, 3300, 3300e, 7210, 7250, 7250i, 6610, 6800, 6820a, 6650, 8910, 8910i, 8310, 3510, 6385, 6370, 1220, 1260, 1261, 7600, 3320, 3585, 3585i, 3570i, 6310, 6310i, 6100, 6200, 5140, 5100, 5100a, 3590, 6510, 3595, 3360, 6360, 8390, 6800a, 8270, 6590, 2285, 2275, 2270, 6108, 3108, 3510i, 8280, 6230, 6340i, 3560, 2280, 1100, 3100, 3120, 6220, 3520, 7200, 6560, 6225, 6230b, 3200, 3200b, 6585, 100b, 3220, 1100a, 2260, 2261, 2220, 2221, 3586i, 3105, 3220b, 3100b, 2650, 2651, 6015, 6016, 6019, 2112, 6011i, 2600, 2600cn, 3125, 6810, 2300, 2300a, 7270, 3205, 7280, 7260, 6255, 6256, 6012, 6020, 6020b, 6610i, 6170, 6170b, 6822a, 6230i, 6620, 9500, 9300, 7710, n-gage, 3600, 3620, 3650, 3660, 7650, 6600, N-Gage Qd, N-Gage QDa, 7610, 7610b, 6670, 6670b, 6260, 3230

如果你的手机型号是上述列表中的某个，并且你忘了自己锁码，那么你就可以找一个s60 的机器安装这个软件进行计算...

上述列表中的机型并非是可以运行本软件的机器，而是说上述机型是可以使用通过本软件计算出来的锁码的机型。

All the users who have forgotten their Security/Lock Codes need not to worry. You just need to know your IMEI (International Mobile Equipment Identity) number.

To check your IMEI number, type *#06# on the main screen. This number can also be found on the backside of the handset. Just remove the battery.

You can have an application which will calculate the Master Code of your phone. This code can be used to change your present Lock/Security code.

DISTRIBUTION

You can freely make copies of the archive and distribute them as

long as no alterations are made to the contents.

DISCLAIMER

THIS SOFTWARE AND ALL THE ACCOMPANYING FILES ARE PROVIDED "AS IS" AND

WITHOUT ANY WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO

IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR

PURPOSE.

ANY MY LIABILITY WILL BE LIMITED EXCLUSIVELY TO PRODUCT REPLACEMENT.

IN NO EVENT SHALL I BE LIABLE FOR ANY DAMAGES WHATSOEVER (INCLUDING WITHOUT

LIMITATION, DAMAGES FOR LOSS OF BUSINESS PROFITS, BUSINESS INTERRUPTION,

LOSS OF BUSINESS INFORMATION, OR ANY OTHER PECUNIARY LOSS) ARISING OUT OF

THE USE OR INABILITY TO USE THIS PRODUCT.

All other trademarks mentioned herein are property of their respective

companies.

DESCRIPTION

MCode is software that runs on Symbian platform (S60) and allows you to calculate

Master Code for Nokia DCT3 (6110,8210,etc..) and DCT4 (8310,etc...)phones.

Once calculated Master Code is valid until IMEI is changed on phone.

It can be usefull if you forget 5-digit user code, you can always

use 10 digit Master Code!

Master Code unlock ONLY user lock code (default"12345") NOT SP lock code!!!

YOU CAN USE THIS SOFTWARE ONLY TO UNLOCK YOUR PHONE!, DO NOT USE ON OTHER PHONES!

***Program is tested on 6630(S60) and codes are tested on 6110,8210,8310!

If you have any problem with this program then just DO NOT USE IT!!!

If you are wondering what phone models are these.. here you go --

So if your phone model is one of these and you've forgotten the lock code etc... you know whom to ask now